Furnace Installation & Services in Escondido, СА

We offer expert gas furnaces installation services to homes in Escondido, California, and the neighboring communities. There are specialists on staff who have been approved to deal with gas equipment by our company, Accord Air. This, together with a wealth of experience, enables us to rapidly and—more importantly—accurately install gas furnaces.

At Accord Air, we have extensive experience with gas condensing furnaces, a modern form of furnaces.

Our crew will install gas boilers and adjust water and heating services in the Escondido area.

The costs to install and regulate a gas system in Escondido will vary determined by the complexity of the equipment that is installed, how the project documentation stays organized (for example, is it energy-saving), how many circuits and heat consumers there are, and what level of automation there is.

Gas furnaces installation instructions 

• When installing a gas furnace, it is essential to make sure that it is not placed so that it touches any walls. This means that putting the furnaces in a recess or altering the fitting in any manner is prohibited by the aforementioned requirements.
• Once installation the furnace has been placed safely, it needs to be connected to all necessary networks, including gas, water, and electricity. It’s crucial to keep in mind that gas installations should only be done by qualified, experienced professionals.
• The homeowner can take care of the water and electrical connections. To ensure a safe and effective installation, it is crucial to strictly follow the instructions that come with the furnaces.

All gas systems must operate under the requirements and conditions listed below:

• Alcohol, distilled water, or regular antifreeze for the heating system cannot be fed to gas systems. The heat exchangers are specifically designed to operate with ordinary, clean water; using any other circulating fluid may cause damage, unless the boilers manufacturer specifies otherwise.
• It is necessary to do a thorough water treatment of the overall heating system, ideally twice, if the system was first loaded with antifreeze for no particular reason. There is a risk of explosion due to the water and antifreeze mixture beneath the heat exchanger.
• Because of the built-in safety measures, it is critical that the water and gas movement within the furnace’s heat exchanger moves in a contrast manner so as to avoid any potential explosion. So, when coupling both the hot and cold water pipes, considerable care should be used.
• To optimize system performance and longevity, it is advisable to install coarse filters at the lowest points of the system. These filters serve a dual purpose by both extending the lifespan of the heat exchanger and functioning as drainage points during seasonal system maintenance at the onset and conclusion of the heating season.

The world of technology continually advances, and this progression is equally relevant to the realm of gas boilers.

Specific Heating System Requirements

When developing a gasification project and connecting a gas furnaces, it is imperative to adhere to the following criteria for the heating system:

• The heating system must undergo a pressure test at 1.8 atmospheres.
• An expansion tank and an air valve should be strategically placed at the system’s highest point.
• Horizontal sections of heating pipes should be inclined at a positive angle, not exceeding 5 mm per running meter.
• boilers Power Supply Guidelines
• In accordance with regulations, furnaces necessitate a dedicated 20-amp electrical wiring line, even though modern furnaces automation consumes minimal electricity.
• Most advanced “smart” boilers can automatically switch to a minimal heating mode in the event of a power supply interruption.
• To ensure the furnaces’s autonomy during power outages lasting up to 1-2 days, a standard uninterrupted power supply (UPS) with a capacity of 1-1.5 kW is sufficient.

Our company Accord Air in Escondido, СА works with furnaces and heating equipment of well-known brands: Bryant, GREE, Trane, AC Pro and others.

Specialists of our service center will help you to orient the installation correctly in a huge range of boilers and heating equipment and will choose the best option for you.

After all works installation we issue a corresponding document – act. We provide a guarantee for the quality of work performed. Your appeal to us – a guarantee that the gas furnaces will be installed not only quickly, but also correctly. The work installation involves not only plumbers, but also qualified engineers. If you need real quality work with official confirmation in the form of acts and contracts, contact our company Accord Air.