Heat Pump Installation & Services in Encinitas, СА

Home heating with traditional solid fuel boilers, gas or electric equipment is becoming more and more costly. Accord Air keeps up with the times – offers a cost-effective, efficient solution to the problem – turnkey installation of heat pumps in Encinitas, СА and the region.

We are an independent company, and do not represent a particular manufacturer. We select a heat pump, brand (manufacturer) of equipment based only on the specific needs of our customers.

How much does a heat pump installation cost?

The cost of the work might differ and is determined by:

What brand, size, and heat pump type (air-water or geothermal) you choose to install.
Engineering-geological research of the location will reveal the following: the characteristics of the soil, the depth of the groundwater, the potential depth of drilling wells, and the number of wells (in the case of installing geothermal pumps).
What level of system automation is required, etc.
The price to install a heat pump is determined by these elements and a few others. But you don’t need to conduct extensive study or complicated computations right now in order to estimate the amount.

We will advise you on the equipment’s cost based on pricing analyses of previously completed projects that are comparable to yours. You will then be able to comprehend the price and particulars of heat pump installation for your facility.

Two heat pumps installed outside the house.

WHY THE HEATING SYSTEM NEEDS TO BE MODERNIZED

Technologies are advancing, and society is changing. Energy-efficient technology is replacing conventional space heating techniques.

Among these are heat pumps, which enable the conversion of older high-temperature heating systems to more modern low-temperature ones. In other words, use water heating floors, warm walls, and fan coils in place of standard cast iron or aluminum radiators with a surface temperature of 60°C. This will enable you to keep a coolant temperature of 45 ° C in the room at a comfortable level.

What does it give?

In the beginning, it expands the heating area.
Second, by not using additional energy to heat the coolant up to 60°C, you can save a lot of money.
Thirdly, it raises the comfort level.
Fourth, low-temperature heating maintains a comfortable indoor environment by not drying out the air.
The issue of air drying out is resolved and the effectiveness of heating the space as a whole is boosted by swapping out traditional radiators with fan coils. Through the pipes, a heat transfer medium that circulates and has a maximum temperature of 45 °C enters the fan coil radiator.

The integrated fan drives the air through the fins of the radiator, thereby heating it. Thanks to the fan, the temperature is quickly transferred to the air and spread throughout the room.

Modernisation of a heat pump-based heating system will be even more efficient if it is possible to integrate underfloor heating and/or warm walls into the heating circuit.

Recently, we have been frequently approached by customers with requests to modernize existing heating systems for the installation of heat pumps. For this reason, we recommended the construction of a low-temperature heating system (underfloor heating, warm walls, fan coils) already at the initial construction stage. Even if you are now planning to heat the premises with a gas, solid fuel or electric boiler.

It is very likely that after several heating seasons, you will decide to install a heat pump – the heating system will be ready for it. This way, you’ll keep the maximum efficiency of your heat pump heating system without destroying your walls and floors. You’ll simplify the upgrade process, and you’ll be able to spend the remaining money on more useful things. Be wise during the construction phase.

A heat pump installed outside a house in San Diego.

Geoprobe installation

The most time-consuming phase of the work, involving drilling boreholes, soldering the probes with thermistor couplings and installing them for the vertical soil collector. These are the ones that will extract the low-potential heat needed to heat your home.

The geoprobe itself is one or more U-shaped loops of pipe that are lowered into a borehole drilled in the ground. The borehole is thoroughly filled with mud to ensure that the surface of the geoprobe is in full contact with the ground. This process is called well plugging.

Installation and Services

Installation of underfloor, wall and fan coil heaters

At this stage the heating devices are installed, which will keep you warm on cold winter evenings. The installation of underfloor heating includes the following steps:

Calculation of the warm floor.
Completion of the necessary materials (pipe, collector, insulation).
Installation of insulation and damping tape.
Installation of floor heating pipes.
Installation of the floor heating manifold and the mains supplying it.
Checking the tightness of the system.
Pouring the screed.

Order the installation of heat pumps in Encinitas, СА and the region on a turnkey basis in the company Accord Air now and start saving on heating the house, but not on the comfort of staying in it.

Our contact numbers: 8582088140

Call, leave a request on the site – we will contact you.

Subtitle

Frequently Asked Questions

Visit our FAQ page for quick answers to your questions about heat pump installation and services in Encinitas.

What is HVAC?

HVAC is short for Heating, Ventilation and Air Conditioning. HVAC is most oftenused to depictthe whole heating and cooling system consisting of the duct work, air filters, humidification controls, and registers.

What regular maintenance do heating and air conditioning systems need?

The most important part of HVAC maintenance aspect is maintaining unrestricted air flows. Dust, dirt, and debris are an HVAC system’s worst enemies. Whether it’s an indoor or outdoor unit, you must keep all filters clean and heat exchangers and coils free of restrictions.

We recommend that your heating and cooling system be checked and serviced twice a year; ideally a spring and autumn tune-up. Also we recommend that you change your filter regularly, depending on the type of filter you have. This alone can eliminate many of the most common problems that need fixing and can significantly reduce the likelihood of a serious breakdown.

How do I know if I have an existing warranty on my furnace, air conditioner or HVAC system?

Locatethe label on the outer surface of the equipment for a manufacture date. If the equipment is less than five years old it may have a warranty, but also may not based on the model. Warranty terms and conditions change by manufacturer and the installing company. AirPro Experts Heating & Air Conditioning can verify the warranty status of your heating and cooling system via Get Warranty form.