Heat Pump Installation & Services in Escondido, СА
The service of installation/dismantling/transportation of heat pumps with the involvement of a qualified master is in high demand today. Our company Accord Air in Escondido, СА specializes in comprehensive maintenance services, including installation/demolition/transportation of systems. Our engineers provide comprehensive assistance to the customer on installation/disassembly/transfer of heat systems, regardless of the complex and complexity of the work.
Frequent breakdowns of heat pumps
Heat pump services may be required even for the highest-quality units. There are many reasons for this
Most often our specialists encounter the following faults:
- Leakage of refrigerant. Freon is usually used in climate control equipment. Its leakage can be caused by any mechanical damage. Sometimes even a small scratch is enough to cause a breakdown. An experienced master will easily find the vulnerable place, and restore its tightness. Then the mechanism is re-filled with refrigerant.
- Defrosting of the heat exchanger. Having analyzed the situation, the specialist will offer to resolve it or replace it. When installing a new part, it is important that its technical parameters correspond to the specific system.
- Breakdown of the compressor. It is often impossible to repair it. Usually it is necessary to order a new one. As in the previous case, it is necessary to carefully ensure that the model matches the technical characteristics.
- The failure of circular pumps. Depending on the specifics of the failure, they must be repaired or replaced.
- Wear and tear of the inlet valves. If the parts are badly worn, they must also be replaced.
During diagnostics, technicians often notice one of two problems: high evaporating pressure or high condensing pressure. In the first case, the fault may be caused by defective inlet valves, jamming of the thermostatic control valve, too high load on the system, or compressor not meeting the stated capacity. Probable causes of increased condensation pressure – closing of the discharge valve, cessation of condenser cooling, its heavy contamination, increased refrigerant content in the system.
Competent repair of heat pumps always starts with a detailed diagnosis. It is possible that the defect occurred as a result of incorrect installation or calculations during installation were carried out incorrectly. Or maybe the users regularly violated the rules of operation of the equipment. Only a professional can determine the cause of incorrect operation.
Maintenance of heat pumps: steps to be followed
- External inspection. This will help to identify defects on the outdoor unit, timely eliminate the problem associated with the heating of air masses.
- Check the pressure level.
- Analysis of the degree of heating of the room. Detection of overheating, determination of the voltage generated on the compressor.
- Fixation of failures in operation. If in time to find a breakdown, determine the cause and eliminate it, it will give the opportunity to significantly extend the operating time of the equipment.
Types of heat pump maintenance works
Heat pumps maintenance service includes the following works:
- external inspection, checking the serviceability of individual elements, their connections;
- checking of power supply by phases;
- inspection of wiring for cracks, breaks, integrity of the insulation layer;
- testing of automatics;
- inspection of connecting units, mechanism parts for corrosion;
- checking of tightness;
- control of refrigerant pressure, topping up if necessary;
- cleaning of water filters;
- checking the tightness of valves;
- compressor oil refueling;
- cleaning of the heat exchanger.
It may be necessary to carry out other types of work during diagnostics.
The specialist records a number of important indicators:
- heated air temperature inside and outside the room;
- pressure parameters;
- vapor overheating values;
- the voltage level of the electric current.
If there are failures in the operation of the equipment, the specialist additionally finds out:
- pressure surges, their magnitude;
- parameters of electric voltage;
- temperature at the inlet and outlet point;
- oil consistency, viscosity, temperature, volume.
Such an impressive list of works will help to carry out a thorough diagnosis of the equipment, to identify all kinds of faults and in time to repair heat pumps.
Advantages of having the heat pumps assembled and dismantled by professionals
In assembly we are not only guided by experience and knowledge of every detail, but also by the balance of thermal insulation.
Professional assembly includes checking all system components to ensure that they continue to work smoothly. In our work we pay great attention to the temperature regime of the room and additionally equip the technique with temperature equipment to maintain its performance.
- Masters have vast experience in working with thermal systems, so you can have no doubts about the quality of installation. This approach allows us to create all conditions for proper functioning of the heat pump heating and ventilation system. We know the subtleties of technical inspection of high-temperature industrial units.
- Fulfillment of technological recommendations. Engineers come to the call with the availability of all equipment, tools, parts for quality installation of the unit of any level of complexity.
- Our specialists at Accord Air in Escondido, СА pay great attention to neatness, so the handling of equipment will not cause you any remarks.
- Installation, dismantling, transfer of ventilation allows the owner to implement the project in both residential and commercial, industrial, office (work) space. Quality service guarantees customer satisfaction for many years
- Turnkey guarantee of a long service life. Correct assembly and disassembly can extend the service life of the device while maintaining its functionality.
